Advantages and Applications of High Softening Point Petroleum Resins in Offset Printing Ink | Ecopower HC-9130 and HC-9140 C9 Petroleum Resin is a key component in offset printing ink, significantly enhancing ink performance and print quality. The C9 petroleum resin grades HC-9130 and HC-9140 offered by Ecopower Company, belonging to the high softening point petroleum resin series with softening points of 120-130°C and 130-140°C respectively, provide unique performance advantages for offset printing ink. Below are the overall advantages and application characteristics of high softening point petroleum resins in offset printing ink: Overall Advantages of High Softening Point Petroleum Resins： Excellent Heat Resistance The high softening point characteristics of HC-9130 and HC-9140 ensure stability in high-temperature environments, preventing ink from softening or deforming during the printing process. This makes them particularly suitable for high-speed printing and high-temperature drying processes. Enhanced Ink Durability High softening point petroleum resins improve the wear and scratch resistance of ink, making printed products more durable and extending their lifespan. Improved Ink Gloss HC-9130 and HC-9140 petroleum resins significantly enhance the glossiness of ink, resulting in a smoother and more vibrant print surface, ideal for high-quality printing requirements. Increased Ink Adhesion High softening point petroleum resins enhance the adhesion of ink to various substrates (such as paper, cardboard, and plastic), ensuring that printed patterns are durable and resistant to peeling. Optimized Ink Viscosity HC-9130 and HC-9140 petroleum resins effectively adjust ink viscosity, making it more suitable for offset printing processes and ensuring consistent ink transfer and print quality. Enhanced Weather Resistance High softening point petroleum resins improve the water, light, and heat resistance of ink, ensuring print stability in outdoor or challenging environments, preventing fading or deterioration.   Application Characteristics HC-9130 (Softening Point: 120-130°C) Suitable for printing inks requiring high gloss and adhesion, commonly used in high-quality printed products such as books, magazines, and packaging. Its moderate softening point ensures stability in high-temperature environments, making it ideal for high-speed printing and high-temperature drying processes. HC-9140 (Softening Point: 130-140°C) Offers higher heat resistance and wear resistance, making it suitable for printed products requiring exceptional durability, such as outdoor advertisements, packaging materials, and labels. Its high softening point ensures excellent performance even in extreme environments.   Recommended Usage To achieve optimal results, the recommended usage of Ecopower HC-9130 and HC-9140 petroleum resins is as follows: HC-9130: Recommended addition is 8%-12% of the total ink weight, with specific amounts adjustable based on pr...

Crosile® 5246 is a silane co-oligomer that combines the functionality of diamino groups and alkyl-functional silanes, offering versatile reactivity with organic resins and inorganic surfaces such as concrete, glass, and aluminum. This unique product acts as an efficient adhesion promoter between amino-reactive resins (such as MS polymers, silicones, silylated polyurethanes, polyurethanes, and epoxies) and inorganic substrates. The diamino group in Crosile® 5246 enhances adhesion performance, while the alkyl chain side imparts superior hydrophobicity. Key Features and Benefits of Crosile® 5246 Crosile® 5246 Key Features (Simplified) 1. Superior Adhesion: Enhances bonding between organic resins and inorganic substrates like glass, concrete, and aluminum. 2. Improved Mechanical Strength: Boosts the durability and flexibility of adhesives and coatings. 3. Low VOC, Low Odor: Reduces volatile organic compounds and minimizes odor during application. 4. Enhanced Hydrophobicity: Provides better water resistance compared to regular diamino silanes. 5. Elasticity and Flexibility: Offers improved elasticity and lower modulus in cured adhesives. 6. Anti-Yellowing: Less prone to discoloration over time, maintaining a clean appearance. 7. Coupling Agent for Composites: Strengthens mineral-filled rubbers and resins, improving their overall performance. Chemical Structure of Crosile® 5246 Crosile® 5246 is a carefully engineered silane co-oligomer with diamino-functional and alkyl-functional groups, allowing it to react with a variety of substrates and resins. This dual functionality ensures exceptional adhesion, durability, and water resistance. Applications of Crosile® 5246 Adhesives and Sealants: Used as a key ingredient in MS polymer, polyurethane, epoxy, and silicone adhesives for its excellent adhesion-promoting properties and flexibility. Coatings: Improves bonding to inorganic surfaces such as glass, concrete, and aluminum while enhancing mechanical properties and resistance to environmental factors. Rubber and Composite Materials: Acts as a superior coupling agent to enhance the performance of rubber and composite materials filled with minerals, providing better strength, flexibility, and longevity. Industrial Applications: Suitable for use in demanding industrial environments where high adhesion, elasticity, and hydrophobicity are required. Construction Materials:   Improves adhesion and hydrophobic properties of construction materials, making it an ideal choice for glass bonding, concrete repair, and facade coatings. Why Choose Crosile® 5246? Crosile® 5246 stands out as a high-performance silane co-oligomer due to its ability to enhance adhesion, mechanical properties, and hydrophobicity across a variety of applications. It is an essential product for manufacturers seeking to improve the performance of adhesives, coatings, and composite materials while maintaining environmental compliance with low ...

Boost Performance with Flecosil-300: The High Oil Absorption Silica In industries demanding high-performance materials, Flecosil-300, a specialty silica from Ecopower, stands out for its exceptional adsorption properties and superior mechanical performance, making it an indispensable material in various fields. Key Features: Exceptional Oil Absorption: With outstanding oil absorption properties, Flecosil-300 is ideal for adsorbing liquids, oils, and impurities, making it the perfect choice for pesticide carriers, dry powder fire extinguishers, and catalyst supports. Enhanced Mechanical Performance: Thanks to its large surface area and active surface functional groups, Flecosil-300 significantly improves the tensile strength, tear strength, and wear resistance of rubber products, ensuring exceptional performance even under demanding conditions. Wide Applications: From high-transparency rubber and coatings to agricultural and fire safety applications, Flecosil-300 delivers unique performance advantages across diverse industries. Applications: Rubber Industry: Optimizes high-transparency silicones, TPU, and specialty rubber products, enhancing mechanical performance and durability. Coatings and Inks: Acts as a thickening and anti-settling agent, improving transparency and stability for high-end coatings and inks. Agriculture and Fire Safety: Its excellent adsorption properties make it an ideal ingredient for pesticide carriers, dry powder fire extinguishers, enhancing dispersion and stability. Technical Advantages: High Surface Area & Active Functional Groups: With a surface area of 260-300 m²/g and a rich array of functional groups, Flecosil-300 ensures excellent adsorption and enhanced product performance. Eco-friendly: As a non-toxic, highly efficient additive, Flecosil-300 meets the environmental standards of modern industries, supporting sustainable development.   Packaging & Storage: Packaging: 20kg per bag for easy transport and convenient storage. Storage Requirements: Store in a sealed container, keeping it away from moisture, high temperatures, and direct sunlight to maintain optimal effectiveness. Why Choose Flecosil-300? Flecosil-300 is a game-changer for industries such as rubber, coatings, agriculture, and fire safety. Whether you're looking to enhance product performance, optimize formulas, or find better dispersion and adsorption materials, Flecosil-300 provides the solution you need to stand out in a competitive market.   Contact us today to learn how Flecosil-300 can help you elevate your products and drive industry innovation!

What is Precipitated Silica? Precipitated silica, a synthetic form of amorphous silicon dioxide (SiO2), is a game-changing additive in the rubber industry. Known for its ability to enhance performance and durability, it is a vital material in products like tires, footwear, and silicone rubber. Derived from quartz sand, precipitated silica undergoes a precise manufacturing process that ensures its adaptability to various industrial applications.At ECOPOWER New Material, we specialize in Rubber Grade Precipitated Silica, delivering high-quality products tailored to meet the stringent demands of the rubber industry. Why Choose ECOPOWER's Precipitated Silica? Our Rubber Grade Precipitated Silica stands out for its exceptional properties: ●Manufacturing Excellence: Produced through the hydrolysis of sodium silicate with sulfuric acid, it is meticulously processed to achieve superior quality. ●High Compatibility: Soluble in sodium hydroxide (NaOH) and hydrofluoric acid (HF), it remains stable in water and most solvents, ensuring reliability in diverse formulations. ●Customizable Properties: Key features such as BET specific surface area, sieve residue, and DBP absorption are optimized for consistency and performance. Applications of Precipitated Silica in the Rubber Industry 1.Tires: a.Improves wet grip for enhanced safety. b.Reduces rolling resistance, contributing to energy efficiency. c.Increases treadwear durability for longer-lasting tires. Recommended Products： ●Type 120, 140, 165, 175MP, 185MP, 175GR, 185GR, and more. ←  ←  ←  Click on the product model to view specific information.   2.Rubber Footwear: a.Boosts tear strength and abrasion resistance for durable soles and heels. b.Enhances flexibility and comfort. Recommended Products： ●Type 120, 140, 165, 175MP, 185MP, 175GR, 185GR, and more. ←  ←  ←  Click on the product model to view specific information.   3.Silicone Rubber: a.Acts as a reinforcing filler to improve tensile strength, elasticity, and heat resistance. Recommended Products： ●Type 779,779-1,800, and more. ←  ←  ←  Click on the product model to view specific information.   4.Rubber Additives: a.Functions as a matting agent, delivering smoother surfaces and reducing gloss for coatings, paints, and inks. Comprehensive Product Range Recommended Products： ●Type740,750,750Y,770,750w and more. ←  ←  ←  Click on the product model to view specific information. ECOPOWER offers an extensive selection of Rubber Grade Precipitated Silica in powder, micro pearl, and granular forms. Available grades include.Each grade is designed with specific physical properties, allowing customers to select the ideal solution for their needs.   Why ECOPOWER is Your Best Choice 1.Industry Expertise: Decades of expe...

Anti-caking Agent Precipitated Silica 826 Specifications Items Specification Appearance White Powder Micro Pearl  Heating loss(105°C) % ≤6.5 ≤6.5 Loss on ignition(1000°C) % ≤8.5 ≤8.5 DBP oil factor cm3/g 2.0-3.5 2.0-3.5 SiO2(content) % ≥96 ≥96 pH value 5.0-8.0 5.0-8.0 Heavy metal(Pb) mg/kg ≤30 ≤30 As mg/kg ≤3.0 ≤3.0 Cd mg/kg ≤0.5 ≤0.5 Pb mg/kg ≤5 ≤5 Na2SO4% ≤4.0 ≤4.0 Average grain diameter d50 μm 60-150 180-400 Feed is an indispensable and important part of the farming industry, and its quality has a profound impact on the growth and development and health of animals. In recent years, the continuous progress of science and technology has brought new development opportunities for the feed industry, and feed grade silica, as an important additive, has played a positive impact on improving feed quality. In order to guarantee the improvement of feed quality and the ecological and high-quality development of the breeding industry, it is imperative to formulate scientific and reasonable standards for feed grade silica. I. Definition and Characteristics of Feed Grade Silica Feed grade silica is a kind of high-purity carbon black substances, with nanoscale carbon black particles as the main component, and after special processing. Its characteristics mainly include high specific surface area, low thermogravimetric loss, good dispersibility, excellent adsorption capacity, and harmless and non-toxic. These characteristics make feed grade silica an ideal feed additive. Second, the function and application of feed grade silica 1. Promote the digestion and absorption of feed: feed grade silica can adsorb harmful substances in feed, improve the utilization rate of feed, and enhance the digestion and absorption of feed by animals. 2. regulating intestinal micro-ecological environment: feed grade silica has good dispersion and adsorption ability, which can adsorb harmful microorganisms and toxins in the intestinal tract, regulate the balance of intestinal flora, and reduce the incidence of diarrhea and digestive tract diseases. 3. Improve animal immunity: feed grade silica has a promoting effect on animal's digestive system and immune system, which can enhance animal's immunity and reduce the risk of disease. 4. Improve feed quality: the addition of feed grade silica can improve the stability and fluidity of feed, reduce oxidation and mildew of feed, and extend the shelf life of feed. The necessity of formulating the standard of feed grade silica 1. Ensure animal health and safety: feed is directly related to the health and safety of animals, the development of feed grade silica standards can standardize the quality of feed additives to reduce potential risks. 2. Promote the development of farming industry: the rational use of feed additives can improve the feeding efficiency and economic benefits, and the formulation of standards can guide and promote the scientific development of the farming indus...

Hydrogenated hydrocarbon resin have emerged as a highly sought-after material in the adhesives industry, particularly for hot melt pressure sensitive adhesives (HMPSA). These resins are produced through the hydrogenation of unsaturated hydrocarbons present in petroleum resins, resulting in products that exhibit improved hue, odor, and weather resistance. In this article, we will delve into the characteristics, applications, and specifications of hydrogenated hydrocarbon resins, particularly those that are water white in color. Characteristics of Hydrogenated Hydrocarbon Resins Hydrogenated hydrocarbon resins are primarily categorized into C5 hydrogenated resins, C9 hydrogenated resins, DCPD hydrogenated resins and hydrogenated C5&C9 copolymer resins. These resins undergo a hydrogenation process, converting the unsaturated hydrocarbons into saturated hydrocarbons, thereby enhancing their overall performance. Key characteristics of hydrogenated hydrocarbon resins include: 1.      Water White and Odorless: These resins exhibit a water-white color and are odorless, making them suitable for use in applications where aesthetics and odor control are crucial. 2.      Good Thermal Stability and Heating Resistance: The hydrogenation process significantly improves the thermal stability of the resins, enabling them to withstand high temperatures without degrading. 3.      Excellent Compatibility: Hydrogenated hydrocarbon resins display good compatibility with various base polymers, such as SIS, EVA, SBS, SEBS, and polyvinyl, enabling their use in a wide range of adhesive formulations. 4.      Versatile Applications: Due to their exceptional properties, these resins find widespread use in hot melt adhesives, pressure sensitive adhesives, and solvent adhesives, among others. Specifications of Hydrogenated Hydrocarbon Resins ECOPOWER, a leading manufacturer of hydrocarbon resins, offers a range of hydrogenated hydrocarbon resins tailored to meet specific application requirements. Some key specifications for their products include: •  Softening Point: Depending on the type of resin, the softening point ranges from 95-105°C to 130-140°C. •  Color (Gardner): All hydrogenated resins are water white, with a color grade of #0-#1. •  Heat Stability: The resins demonstrate excellent heat stability, withstanding temperatures up to 180°C for 4 hours without significant degradation. •  ASH Content: The ash content of the resins is kept to a maximum of 0.1%, ensuring purity and consistency. Applications of Hydrogenated Hydrocarbon Resins Hydrogenated hydrocarbon resins are widely used in the production of hot melt pressure sensitive adhesives (HMPSA) due to their exceptional adhesive properties. These resins can be blended with base polymers such as SIS, SBS, and SEBS to create adhesives with enhanced tack, peel, and shear strengths. In addition to their use ...

It plays an important role in plastics film. Anti-blocking agents can reduce the adhesion phenomenon between plastic films and improve the processing performance and ease of use of plastic products. During the plastic processing and storage process, due to the characteristics of the plastic surface, the films are easily adhered to each other, which will bring many inconveniences to production and use. The addition of Silica EC 700 anti-blocking agent can form tiny protrusions on the plastic surface, reduce the contact area between the films, and thus reduce the occurrence of adhesion. This anti-blocking agent is usually added to plastics in powder form and plays a role by being evenly dispersed in the plastic matrix. It can improve the smoothness of plastics, making plastic films easier to unfold and transport during processing, reducing friction and wear. In addition, anti-blocking agents can also improve the optical properties of plastics, reduce the haze on the film surface, and improve transparency. In some high-end plastic applications, such as food packaging, optical film and other fields, the optical properties of plastics are required to be high. The use of Silica ec 700 anti-blocking agent can meet these needs. At the same time, anti-blocking agents can also improve the printing performance of plastics, making ink easier to adhere to the plastic surface and improving printing quality. Specifications Items Specification Test Method Appearance White Powder Visual Inspection Average Particle Size um 4-5 Malvern Master Sizer Loss on Drying % MAX 3 ISO787-2 Oil Absorption ml/100g  60-120 Linseed Oil Surface Area M2/g  600-700 BET PH 5.0-7.0 In 5% slurry SiO2 % MIN 99.9 - Whiteness MIN 95 Hunter

Ecopower's Crosile® Si28, Si32, Si40, and Si50 series represent a range of high-performance tetraethyl orthosilicate (TEOS) products, meticulously designed to meet the diverse needs of various industries. Offering SiO₂ contents of 28%, 32%, 40%, and 50%, these products deliver exceptional performance across a wide array of applications. What Are Crosile® Si28, Si32, Si40, and Si50? Crosile® Si28, Si32, Si40, and Si50 are advanced TEOS-based products developed with precision and consistency in mind. These liquid TEOS derivatives are highly reactive, soluble in a wide range of organic solvents, and hydrolyze with ease, making them indispensable for applications in coatings, ceramics, aerogels, and more. With carefully controlled SiO₂ content and unique chemical characteristics, Crosile® products excel in demanding environments, offering unmatched flexibility and performance. Key Features of Crosile® Si28, Si32, Si40, and Si50 Adjustable SiO₂ Content: Available in 28%, 32%, 40%, and 50% SiO₂ options to meet specific application needs. Enhanced Stability: Engineered to resist polymerization caused by heat, light, or peroxides, ensuring reliability during processing. Wide Solubility: Compatible with various organic solvents, allowing seamless integration into diverse formulations. Applications of Crosile® Series Products 1. Aerogel Production Crosile® Si28 and Si40, with their high SiO₂ content and reactivity, are ideal for aerogel production. Aerogels made from these products offer excellent insulation, lightweight properties, and thermal stability, making them the top choice for high-performance insulating materials. 2. Steel Casting and Ceramic Materials Crosile®  Si28 and Si40 act as premium inorganic binders in the steel casting industry, enabling the formation of high-strength silica-based ceramic molds for precision applications. They are also widely used in advanced ceramic materials, providing superior strength and reliability. 3. Polymer Crosslinking Crosile®  Si28, Si32, Si40, and Si50 function as highly efficient crosslinking agents in silicone polymers. They enhance polymer strength, flexibility, and durability, making them suitable for advanced material applications. 4. Zeolite Synthesis Crosile® Si28 and Si40 serve as reliable silica sources for zeolite synthesis. These zeolites are extensively used in catalysis, adsorption, and ion exchange, with Crosile® products ensuring consistent quality and high efficiency. 5. Coatings and Adhesives Crosile® Si28 and Si40 offer exceptional performance in coatings and adhesives, improving water resistance, oxygen resistance, and high-temperature durability. As adhesion promoters, they enhance bonding strength between substrates, ensuring long-lasting performance in coatings, layers, and specialty adhesives. 6. Sem...

Uncovering the Applications of Chlorosulfonated Polyethylene Rubber(CSPE) in Medical Protective Gear, Construction Materials, Industrial Linings, Automotive Components, and Electrical Insulation   Chlorosulfonated Polyethylene Rubber, also known as Hypalon or CSM, is making a significant impact in various industrial arenas. Its distinctive properties are enabling enhanced performance and durability in these diverse fields. This article explores how CSPE is transforming these specific applications and the advantages it brings.   Enhancing Medical Protective Gear with Chlorosulfonated Polyethylene Rubber(CSPE) In the medical field, the demand for reliable protective gear is crucial. CSPE is emerging as a key material by providing medical protective equipment with excellent resistance to chemicals and abrasion. These properties ensure that the gear can withstand harsh cleaning agents and frequent use, making it ideal for medical gowns, gloves, and masks. Its ability to maintain integrity in a medical environment helps ensure the safety of healthcare workers and patients. Improving Construction Materials with Chlorosulfonated Polyethylene Rubber(CSPE) Construction materials benefit greatly from the incorporation of CSPE. The material enhances the durability and weather resistance of building components. CSPE's resistance to UV rays, moisture, and chemicals leads to longer-lasting roofing membranes, sealants, and waterproofing materials. This helps in reducing maintenance costs and increasing the lifespan of construction projects. Advancing Industrial Linings with Chlorosulfonated Polyethylene Rubber(CSPE) Industrial linings see a remarkable improvement with the use of CSPE. It provides linings with superior chemical resistance, enabling them to handle corrosive substances commonly found in industrial processes. The enhanced durability and resistance to wear and tear result in more reliable industrial equipment and reduced downtime for maintenance. Enhancing Automotive Components with Chlorosulfonated Polyethylene Rubber(CSPE) CSPE plays a vital role in the automotive industry. It is used in the manufacturing of various components such as hoses, gaskets, and seals. The material's resistance to heat, oil, and chemicals ensures the reliable performance of these components in the demanding automotive environment. This contributes to the overall safety and efficiency of vehicles. Optimizing Electrical Insulation with Chlorosulfonated Polyethylene Rubber(CSPE) CSPE also has a significant impact on electrical insulation. Its excellent dielectric properties and resistance to electrical breakdown make it suitable for insulating electrical cables and components. This helps in preventing electrical faults and ensuring the safe operation of electrical systems. Advantages of Chlorosulfonated Polyethylene Rubber(CSPE) Medical Protective Gear: Offers excellent chemical and abrasion resistance, enhancing the safety and du...